plotly.graph_objs.parcats Module
Functions
plotly.graph_objs.parcats.Dimension([categoryarray=], [categoryarraysrc=], [categoryorder=], [displayindex=], [label=], [ticktext=], [ticktextsrc=], [values=], [valuessrc=], [visible=]) → Dimension
Create a new ‘Dimension’ object
categoryarray- Sets the order in which categories in this dimension appear. Only has an effect if `categoryorder` is set to *array*. Used with `categoryorder`.categoryarraysrc- Sets the source reference on Chart Studio Cloud for `categoryarray`.categoryorder- Specifies the ordering logic for the categories in the dimension. By default, plotly uses *trace*, which specifies the order that is present in the data supplied. Set `categoryorder` to *category ascending* or *category descending* if order should be determined by the alphanumerical order of the category names. Set `categoryorder` to *array* to derive the ordering from the attribute `categoryarray`. If a category is not found in the `categoryarray` array, the sorting behavior for that attribute will be identical to the *trace* mode. The unspecified categories will follow the categories in `categoryarray`.displayindex- The display index of dimension, from left to right, zero indexed, defaults to dimension index.label- The shown name of the dimension.ticktext- Sets alternative tick labels for the categories in this dimension. Only has an effect if `categoryorder` is set to *array*. Should be an array the same length as `categoryarray` Used with `categoryorder`.ticktextsrc- Sets the source reference on Chart Studio Cloud for `ticktext`.values- Dimension values. `values[n]` represents the category value of the `n`th point in the dataset, therefore the `values` vector for all dimensions must be the same (longer vectors will be truncated).valuessrc- Sets the source reference on Chart Studio Cloud for `values`.visible- Shows the dimension when set to `true` (the default). Hides the dimension for `false`.
plotly.graph_objs.parcats.Domain([column=], [row=], [x=], [y=]) → Domain
Create a new ‘Domain’ object
column- If there is a layout grid, use the domain for this column in the grid for this parcats trace .row- If there is a layout grid, use the domain for this row in the grid for this parcats trace .x- Sets the horizontal domain of this parcats trace (in plot fraction).y- Sets the vertical domain of this parcats trace (in plot fraction).
plotly.graph_objs.parcats.Labelfont([color=], [family=], [size=]) → Labelfont
Create a new ‘Labelfont’ object
family- HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include *Arial*, *Balto*, *Courier New*, *Droid Sans*,, *Droid Serif*, *Droid Sans Mono*, *Gravitas One*, *Old Standard TT*, *Open Sans*, *Overpass*, *PT Sans Narrow*, *Raleway*, *Times New Roman*.
plotly.graph_objs.parcats.Legendgrouptitle([font=], [text=]) → Legendgrouptitle
Create a new ‘Legendgrouptitle’ object
font- Sets this legend group's title font.text- Sets the title of the legend group.
plotly.graph_objs.parcats.Line([autocolorscale=], [cauto=], [cmax=], [cmid=], [cmin=], [color=], [coloraxis=], [colorbar=], [colorscale=], [colorsrc=], [hovertemplate=], [reversescale=], [shape=], [showscale=]) → Line
Create a new ‘Line’ object
autocolorscale- Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `line.colorscale`. Has an effect only if in `line.color` is set to a numerical array. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.cauto- Determines whether or not the color domain is computed with respect to the input data (here in `line.color`) or the bounds set in `line.cmin` and `line.cmax` Has an effect only if in `line.color` is set to a numerical array. Defaults to `false` when `line.cmin` and `line.cmax` are set by the user.cmax- Sets the upper bound of the color domain. Has an effect only if in `line.color` is set to a numerical array. Value should have the same units as in `line.color` and if set, `line.cmin` must be set as well.cmid- Sets the mid-point of the color domain by scaling `line.cmin` and/or `line.cmax` to be equidistant to this point. Has an effect only if in `line.color` is set to a numerical array. Value should have the same units as in `line.color`. Has no effect when `line.cauto` is `false`.cmin- Sets the lower bound of the color domain. Has an effect only if in `line.color` is set to a numerical array. Value should have the same units as in `line.color` and if set, `line.cmax` must be set as well.color- Sets the line color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to `line.cmin` and `line.cmax` if set.coloraxis- Sets a reference to a shared color axis. References to these shared color axes are *coloraxis*, *coloraxis2*, *coloraxis3*, etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis.colorscale- Sets the colorscale. Has an effect only if in `line.color` is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `line.cmin` and `line.cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.colorsrc- Sets the source reference on Chart Studio Cloud for `color`.hovertemplate- Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, *xother* will be added to those with different x positions from the first point. An underscore before or after *(x|y)other* will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variables `count` and `probability`. Anything contained in tag `<extra>` is displayed in the secondary box, for example "<extra>{fullData.name}</extra>". To hide the secondary box completely, use an empty tag `<extra></extra>`.reversescale- Reverses the color mapping if true. Has an effect only if in `line.color` is set to a numerical array. If true, `line.cmin` will correspond to the last color in the array and `line.cmax` will correspond to the first color.shape- Sets the shape of the paths. If `linear`, paths are composed of straight lines. If `hspline`, paths are composed of horizontal curved splinesshowscale- Determines whether or not a colorbar is displayed for this trace. Has an effect only if in `line.color` is set to a numerical array.
plotly.graph_objs.parcats.Stream([maxpoints=], [token=]) → Stream
Create a new ‘Stream’ object
maxpoints- Sets the maximum number of points to keep on the plots from an incoming stream. If `maxpoints` is set to *50*, only the newest 50 points will be displayed on the plot.token- The stream id number links a data trace on a plot with a stream. See https://chart-studio.plotly.com/settings for more details.
plotly.graph_objs.parcats.Tickfont([color=], [family=], [size=]) → Tickfont
Create a new ‘Tickfont’ object
family- HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include *Arial*, *Balto*, *Courier New*, *Droid Sans*,, *Droid Serif*, *Droid Sans Mono*, *Gravitas One*, *Old Standard TT*, *Open Sans*, *Overpass*, *PT Sans Narrow*, *Raleway*, *Times New Roman*.
plotly.graph_objs.parcats.Transform() → Transform
Create a new ‘Transform’ object
Globals
Do you still have questions?
Our Community Forum is full of helpful information and Anvil experts.